Full Specifications and Features
Size & Weight
- DIMENSIONS (W X H X D)
- 344 mm x 78 mm x 250 mm
- WEIGHT
- 4.86 kg
Speaker System
- CONFIGURATION
- DVC
- SIZE
- 8 in (20 cm)
General Features
- EFFECTIVE FREQUENCY RANGE
- 20Hz - 200Hz
- IMPEDANCE (OHMS)
- 2 ohms + 2 ohms
- DIAPHRAGM MATERIAL
- Paper
- MAGNET MATERIAL
- Ferrite
- SURROUND MATERIAL
- Rubber
Built-in Amplifier
- LOW PASS FILTER
- 50 Hz–150 Hz
- LOW-PASS FILTER SLOPE
- 12dB/oct
- RATED OUTPUT POWER/THD (14.4 V 20 HZ–20 KHZ) AT 2 OHMS
- 75 W/1.0%
- MAXIMUM OUTPUT POWER (14.4V) AT 2-OHMS
- 160W
What's In The Box
- Level Remote
- Mounting Brackets
Features
Ultra-sleek, shallow subwoofer
No space for a big subwoofer enclosure? At only 3 1/8 inches (7.8 cm) deep, the XS-AW8 powered subwoofer fits in tight spaces in your vehicle for powerful bass sound throughout the car.
Optimally designed driver unit and low-resonance cast-aluminum enclosure
To reproduce powerful bass sound from its compact dimensions, the slim enclosure is paired with a unique rigid subwoofer diaphragm. The built-in amplifier also integrates a sturdy heat-sink to protect the driver unit and amp without introducing unwanted vibrations and harmonic distortion.
Supplied wired remote commander
A supplied wired remote commander allows you to adjust the subwoofer volume from the driver’s seat.
160-W peak (75-W RMS) output power
Fill your car with 160 W (75 W RMS) of clean, dynamic bass sound with our original power IC. The matched class A/B amp is designed for high power and natural, distortion-free sound even at high output levels.
High level input/Audio line input
What if you’re using a factory radio that doesn’t have pre-amp outputs? Simply connect the speaker outputs of your receiver to the high-level inputs. When pre-out audio signals are available from the receiver, connect them to the CH1(R) and CH2(L) terminals. Compatibility with up to 5-V pre-outs means you can utilize higher voltage audio input for a clean audio signal and less external noise.
Single-sided controls and terminals
Connections and amplifier controls are together on the same side for easy installation and tuning. The amplifier features a variable low-pass filter for simple connection to full-range sources, including the speaker-level inputs. A switch additionally allows you to customize the subwoofer phase output, to prevent any reduced bass response due to phase cancellation from other speakers in your system.