Article ID : 00010388 / Last Modified : 08/21/2015

How to locate the MAC address for the Blu-ray Disc player.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

  1. Make sure that the Blu-ray Disc® player and TV or display device are turned on.
  2. Using the supplied remote, press the HOME button.
  3. Use the left arrow or right arrow to select Setup.
  4. Use the up arrow or down arrow to select System Settings.
  5. Press ENTER.
  6. Select System Information.
  7. Press ENTER.