Article ID : 00012318 / Last Modified : 02/22/2016

The USB MODE connection message remains on the camera LCD even when not connected to a computer.

Applicable Products and Categories of This Article

It is not a normal for the USB MODE message to appear when the camera is not connected to a computer. Follow the steps below to troubleshoot this issue.

NOTE: Because each of these steps represents a possible solution to this issue, check if the USB MODE message disappears after completing each step.

  1. Disconnect any cables that may be attached to the camera.
  2. Turn the camera power off and on.
  3. Make sure no foreign material is inserted inside the USB jack (or multi-terminal jack) of the camera.
  4. Connect the camera to the computer and then properly disconnect it from the computer .

The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. Begin the procedure to send your Sony product into a Sony facility to be repaired.