Article ID : 00019342 / Last Modified : 09/26/2018

How to setup the Network Speaker to an Internet network using an Apple® Macintosh® computer.

Applicable Products and Categories of This Article


  1. Make sure the AC power cord is connected securely on the back of the Network Speaker.
  2. Make sure the AC power cord is connected to the AC wall outlet.

    NOTE: The LED on the speaker should flash green while it is powering on and then solid green.

  3. Press the Power Standby button on the Network Speaker.
  4. Turn on the computer and make sure it is connected to the same Internet Network as the Network Speaker.
  5. Click on the Wifi symbol.
  6. Open network preferences and select Sony_Wireless_Audio_Setup from the list.
  7. Open the Safari browser.
  8. Click the Bookmark icon.
  9. Select Bonjour.
  10. Select SA-NS310 from the device list.
  11. Select your language.
  12. Select Network setting.
  13. Enter the Network SSID and Password.
  14. Select Apply.
  15. Click OK.
  16. Once the LED light on the Network Speaker stops flashing and returns to a solid green, the setup is complete.