The HDMI Pass through feature lets you output the HDMI® signal (audio/video) from a Blu-ray Disc®, cable box, satellite receiver or other source device to the TV even when the receiver is in standby mode.
All of the devices used must be connected using an HDMI connection for this feature to work. The image below provides an example of a supported connection.
To set the HDMI Pass Through settings of the AV receiver, check the following steps below.
- Press the HOME button on the supplied remote control.
- Select Settings.
- Select HDMI Settings.
- Select Pass Through.
- Select Auto.
NOTE: If there are multiple HDMI devices connected to the A/V receiver, the priority is given to the last device that was used before the receiver was turned off.