Article ID : 00025378 / Last Modified : 10/19/2016

The power indicator light on the boombox is flashing.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

Follow this procedure to troubleshoot if the power indicator light is flashing.

  1. Unplug the power cord of the stereo system from the AC outlet.
  2. If the stereo system has a voltage selector, ensure it is set to the correct voltage.
  3. Ensure the speaker wires are connected properly.

    IMPORTANT: Only the supplied factory speakers should be used with the stereo system.

  4. Ensure the stereo system has sufficient air flow and ventilation.
  5. Plug power cord back into the AC outlet.

If the issue is still unresolved, service may be required. Begin the procedure to send your Sony product into a Sony facility to be repaired.