Article ID : 00026234 / Last Modified : 10/11/2021Print

The time does not advance, cannot be set, or does not display properly on the alarm clock radio.

    Follow this procedure to troubleshoot the clock radio.

    1. Remove any backup batteries, if the clock radio uses these.
    2. Unplug the clock radio from the AC power for 30 seconds.
    3. Plug the clock radio back in to the AC power.
    4. Reinstall the backup batteries, if the clock radio uses these.
    5. Set the time on the clock radio.
      1. Press and hold the TIME button or CLOCK button for more than 2 seconds, until the hour flashes in the display.
      2. Press the + button or the - button to select date and/or time as required, then press the TIME button or the CLOCK button.
      3. Repeat step number two to set remaining date and/or time attributes.


    • Depending on the model, it may be necessary to set the date before setting the time. Refer to the supplied manual for this or other model-specific features. Manuals are posted on your model support page.
    • Depending on the model and the region, it may be necessary to set the time zone or set daylight saving time (summer time) to on or off.

    The troubleshooting steps listed above should resolve the issue. If you have completed all of the steps and the issue is not resolved, service may be required.  Go to Product Repair.