Article ID : 00188924 / Last Modified : 02/07/2019Print

Perform Auto Program on Your Projection TV

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    Before You Start

    • This procedure will only auto program the channels from the TV tuner and you can't use this to auto program channels from a cable box or satellite set-top box.
    • If you need model-specific information to perform auto program, refer to your TV's manual. Manuals are posted on your model support page.

    Auto Program the TV Channels

    1. Turn on your TV.
    2. On the supplied remote, press the MENU button.
      • If you don't have the supplied remote, you can use the buttons at the back of your TV.
    3. Press the RIGHT ARROW button to select the channel icon.
    4. Press the SELECT button.

      Select button

    5. Press the UP ARROW or DOWN ARROW button to select Auto Program.
    6. Press the SELECT button.
    7. After the TV finished auto programming, press the MENU button.