Follow this procedure to troubleshoot the STEREO indicator on the receiver.
NOTE: The STEREO indicator light only illuminates when a strong enough stereo broadcast is being received.
- Ensure the receiver has been configured for stereo. The stereo indicator will not light in mono mode or when receiving an AM broadcast.
- Verify that the receiver has an FM antenna connected to it. You may have to adjust the location of the antenna for better reception.
NOTE: Depending on the broadcast, some stations may come in weaker than others causing the indicator to turn on and off, or not come on at all.
- Connect a different FM antenna to the receiver. In rural areas, the supplied wire antenna may not be able to receive FM stations clearly.
NOTE: This and other information is also available in the manual included with your product. Refer to you product manual for specific information.