Article ID : 00030524 / Last Modified : 10/29/2019

The Projected Image Looks Like a Trapezoid

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    If the top of the picture is wider or narrower than the bottom, adjust the V Keystone setting. Not all models have this setting, so check your projector manual for model-specific information. Manuals are posted on your model support page.

    Models with V Keystone

    1. On the remote control, press the MENU button.
    2. Use the up arrow or down arrow buttons to highlight Installation .
    3. Press the ENTER button to select the Installation menu.
    4. Use the up arrow or down arrow buttons to highlight V Keystone .
    5. Press the ENTER button to select V Keystone .
    6. Use the up arrow or down arrow buttons to adjust the V Keystone setting.
      • Set the V Keystone to a negative number (-) if the bottom of the picture is wider than the top.
      • Set the V Keystone to a positive number (+) if the top of the picture is wider than bottom.
    7. Press the MENU button to exit the menu.

    Note: The picture's aspect ratio may change, or picture distortion may occur with V Keystone adjustment.

    Models without V Keystone

    Make sure to install or mount your device correctly so that it fits the size of your screen.

    • If your device is tilted up or down, or not mounted correctly, the projected image may be trapezoidal.
    • If the vertical and horizontal plane of the projector's lens aren't parallel to the vertical and horizontal plane of the screen, you'll have a trapezoidal image.