The largest screen size the MP-CD1 can project is 120 inches. Increasing the display size reduces the brightness of the projected image and may prevent the display from being seen if the ambient light is too bright. In this case, bring the projector closer to the projection surface to increase the brightness.
The following table lists the screen size based on the distance of the projector.
Approximately two hours and 30 minutes using a 3.0A AC adaptor or portable charger.
Approximately four hours using a 1.5A AC adaptor or portable charger.
Charging while projecting:
You can charge the projector even if an image is being projected if a 3.0A AC adaptor or portable charger is used, and no external device is connected to the USB-out port. Charging time depends on the brightness of the projected image.
If a 1.5A AC adaptor or portable charger is used while displaying an image, the battery will eventually run out and the projector will power off because the power consumption will be greater than the AC adaptor current.