Article ID : 00244560 / Last Modified : 06/09/2020

Changing the TV stand height or position (A8H, X950H, and Z8H series)

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    Before you start

    • The steps in this guide require three people or more.
    • Make sure an adequate number of people are used to safely support the TV.
    • When you lift one side of your TV, make sure the opposite side doesn't drop to the floor.

    A8H and X950H series TV

    1. Remove the stand from the TV.

    2. Support the bottom of your TV with suitable material such as a stack of newspapers or magazines. The illustration shows approximate size (width, height, and depth) of recommended support material.

      The appropriate material size to put under the TV. A: Width, B: Height, C: Depth

      TV SeriesUnits are in inches
      [A] Width[B] Height[C] Depth
      A8H16-24Approx. 88 or more
      X950H (55, 65, 75)16-24Approx. 108 or more
    3.  

    4. Reattach the stand to your TV in it's new position.
      • A8H series

      • X950H series (55, 65, 75)

    Z8H series TV

    1. Remove the stand from the TV.

    2. Support the bottom of your TV with suitable material such as a stack of newspapers or magazines. The illustration shows approximate size (width, height, and depth) of recommended support material.

      The appropriate material size to put under the TV. A: Width, B: Height, C: Depth

      TV SeriesUnits are in inches
      [A] Width[B] Height[C] Depth
      Z8H16-24Approx. 18 or more
    3.  

    4. Reattach the stand to your TV in it's new position.