This information provides help with changing the height and position of the tabletop stand after the initial setup. In addition to the instructions in this article, use the supplied Reference Guide and Startup (Setup) Guide for your TV as a reference.
Manuals are posted on your model support page.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE
Before you start
- Three or more people are required to support the TV while detaching the stands.
- As you detach the tabletop stands, be careful when lifting the TV because the tabletop stand may fall and cause injury or damage to the TV and the surface that the TV is sitting on.
- Make sure the TV is in an upright position before turning it on. Turning on the TV with the LCD panel facing down may damage the TV or impact picture uniformity.
Change the tabletop stand height or position
Choose your TV series and follow the instructions accordingly:
XR A95K, A90K series
A95K series: You can change the mounting direction of the TV tabletop stand to the front or the back.
A90K series: You can change the height of the stand.
- With one or more people holding the TV, remove the screws and then the stand.
A95K series
A90K series
- Reattach the tabletop stand to the desired position.
Note: For detailed instructions on how to attach the tabletop stand, refer to the Setup Guide included with your TV.
XR A95L Z9K, X95K series
Ways to change the height or position of the Table-Top Stand
- A95L series (55, 65 inches): You can change the height of the Table-Top Stand
- A95L (77 inches), X95L, X93L, Z9K, X95K series: You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.
- With one or more people holding the TV, remove the screws and then the stand.
Notes:
- Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
- When reattaching the Table-Top Stand, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.
- The image below is an example. The shape of the Table-Top Stand and the details of the screw attachment may differ slightly depending on the model.
- Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
(Unit=cm)
| TV model series name | A | B | C |
|---|
| A95L, X95L, X93L, Z9K, X95K series | 30~40 | Approx. 10 | More than 20 |
|---|
- Reattach the tabletop stand to the desired position.
Note: For detailed instructions on how to attach the Table-Top Stand, refer to the Setup Guide included with your TV.
A80L_A83L_A84L series (83 inches)
A80L_A83L_A84L series (55, 65, 77 inches)
XR A80K, X90K series (55 - 85)
XR A80J series
- With one or more people holding the TV, remove the tabletop stand one leg at a time.
- Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
- Reattach the stands in the desired position.
Note: For detailed instructions on attaching the tabletop stands refer to the Setup Guide.
XR A90J, X95J, Z9J series
- With one or more people holding the TV, remove the screws, and then remove one leg at a time.
- Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
- Reattach the tabletop stand to the desired position. Make sure to fasten the screws to the original holes on the rear of the TV.
Note: For detailed instructions on attaching the tabletop stand, refer to the Setup Guide.
XBR A8H, X950H series
- Pull out the Stand from the TV
- Attach the stands using the guides below.
XBR Z8H series
- Detach the tabletop stand from the TV.
- Attach the stand referring to the guide below.
Note: This guide is for reference. For more information, refer to the Setup Guide included with your TV.
