Article ID : 00282008 / Last Modified : 03/29/2023

There is no sound, the sound is too low, or the volume balance between game and chat is unbalanced (INZONE)

Applicable Products and Categories of This Article

Follow these steps to troubleshoot the issue:

Notes:

The Game/Chat balance function is only available for the INZONE H9 and INZONE H7.
When the issue occurs during a phone call or voice chat, refer to the article While on a phone call or voice chat, I can't hear the other party's voice or they can't hear mine.

Select the headphones model:
- INZONE H9 or INZONE H7
- Go to step 2.
- INZONE H3
- Go to step 5.
Select your situation:
- The game console (computer or PlayStation®5) is connected to the headphones using the USB transceiver.
- Go to step 4.
- The smartphone or any Bluetooth® enable device is connected to the headphones.
- Go to step 3.
Perform the following steps on the connected device:
1. Turn up the volume setting on the Bluetooth device.
2. If the issue still occurs, disconnect the Bluetooth connection with the headphones and reconnect them.
- The issue is resolved
- The Bluetooth connection may have been temporarily unstable.
- The issue is not resolved
- Go to step 9.
Disconnect the USB transceiver, and connect it firmly.
Notes:
- Make sure that the slide switch of the USB transceiver is set to the correct side (PC or PS5).
- Connecting the headphones to a USB port of the TV is not guaranteed.
- Connect the USB transceiver directly to the computer or PlayStation 5..
- The issue is resolved
- The connection between the headphones and the USB transceiver may have been temporarily unstable.
- The issue is not resolved
- Go to step 6.
Disconnect the 4-pole mini plug from the USB transceiver and connect it firmly.
Notes:
- Connect the USB audio box directly to the computer. Connecting the headphones to a USB port of the TV is not guaranteed.
- If you are using the PlayStation 5, connect the headphones directly to a controller. Connecting the headphones via a USB audio box is not guaranteed.
- For details on how to connect the headphones, refer to the Connecting the headset to a computer or PlayStation®5 (INZONE H3).
- The issue is resolved
- The issue may have been caused by the connection with the computer or PlayStation 5.
- The issue is not resolved
- Go to step 6.
Set the Output setting of the computer.
Note: The following procedure uses a computer running Microsoft® Windows® 10 OS. The menu items displayed on the computer may vary depending on the OS version.

For INZONE H9, INZONE H7
1. On the Start menu, open Settings.
2. Select System → Sound.
3. Set the Output settings to INZONE H9 / INZONE H7 - Game.
For INZONE H3
1. On the right side of the computer screen, right-click the (Speaker) icon.
2. Select System → Sound.
3. Set the Output settings to INZONE H3.
- The issue is resolved
- The issue may have been caused by the computer sound output settings.
- The issue is not resolved
- - If you are connecting the headphones with a computer, go to step 7.
  - If you are connecting the headphones with a PlayStation 5, go to step 8.
Adjust the volume on the computer.
Left-click the Speaker icon on the computer to turn up the volume and check if the issue is resolved.
- The issue is resolved
- The issue may have been caused by the Master Volume setting.
- The issue is not resolved
- Go to step 9.
Set the Audio Output setting of the PlayStation 5.
For INZONE H9, INZONE H7
1. On the PlayStation 5 Home screen, select Settings.
2. Select Sound → Audio Output.
3. Set the Output Device setting to USB Headset (INZONE H9 INZONE H7).
Hints: If you would like to use the PlayStation 5 controller to change the setting, push the PS< button on the controller, select Sound → Audio Output, and then set the Output Device setting to USB Headset (INZONE H9 INZONE H7)
For INZONE H3
1. On the PlayStation 5 Home screen, select Settings.
2. Select Sound → Audio Output.
3. Set the Output Device setting to Headphones (Controller)
Hints: If you would like to use the PlayStation 5 controller to change the setting, push the PS button on the Controller, select Sound → Audio Output, and then set the Output Device setting to Headphones (Controller)
- The issue is resolved
- The issue may have been caused by the PlayStation 5 sound output settings.
- The issue is not resolved
- Go to step 9.
Turn up the volume using the headphones' VOL (volume) –/+ dial.
You can turn up the volume by turning the VOL (volume) /+ to the + side.

Note: If the volume is set low on the Bluetooth-connected device, the volume may not increase as expected by using the headphones' dial. If this is the case, turn up the volume on the connected device.
- The issue is resolved
- The issue was caused by the volume settings.
- The issue is not resolved
- - If you are connecting the INZONE H9 or INZONE H7 to the device using the USB transceiver, step 10.
  - If you are connecting the INZONE H9 or INZONE H7 to the device via Bluetooth, step 11.
  - For INZONE H3, go to step 11.
Adjust the volume balance between game and chat.
You can use the GAME/CHAT (game/chat balance) button or INZONE Hub software.

Hint: How to use the GAME/CHAT (game/chat balance) button on the headphones:
- When you press the GAME button, the voice chat sound will be quieter and the game sound will be easier to hear.
- When you press the CHAT button, the game sound will be quieter and the voice chat sound will be easier to hear.
Note: The GAME/CHAT (game/chat balance) button is only effective for adjusting the volume balance of the game console connected via the USB transceiver. The volume balance with a Bluetooth device can't be adjusted.
- The issue is resolved
- The issue was caused by the volume balance.
- The issue is not resolved
- Go to step 11.
Check the settings of the application.
Note: For details on the settings refer to the manual of the support site of each application.

For INZONE H9, INZONE H7
On the application setting, make sure that the sound output setting for the voice chat is set to INZONE H9 / INZONE H7 - Chat.
Note: If you are connecting the device via Bluetooth, make sure that the sound output setting of the voice chat is set to INZONE H9 / INZONE H7.

For INZONE H3
On the application setting, make sure that the sound output settings for the voice chat are set to INZONE H3.
- The issue is resolved
- The issue may have been caused by the setting of the application.
- The issue is not resolved
- - If you are using the INZONE H9 or INZONE H7 to connect the device using the USB transceiver, go to step 12.
  - If you are using the INZONE H9 or INZONE H7 to connect the device via Bluetooth, go to step 13.
  - For the INZONE H3, go to step 13.
Pair again the headphones and the USB transceiver.
Follow these steps to perform pairing again with the USB transceiver:
1. Connect the USB transceiver to a computer or PlayStation 5.
2. Press and hold the Connect button on the USB transceiver for about five seconds or more.
  Note: The USB transceiver goes into the pairing mode, and the Connect indicator on the USB transceiver repeatedly flashes in white twice in a row.
3. Turn on the headphones.
  When the pairing is complete, a notification sound is heard and the Connect indicator on the USB transceiver lights up in white.
- The issue is resolved
- The issue may have been caused by the connection between the headphones and the USB transceiver.
- The issue is not resolved
- Go to step 13.
Close the application, and restart it.
- The issue is resolved
- The issue may have been caused by a temporary malfunction of the gaming app.
- The issue is not resolved
- Go to step 14.
Restart the connected device.
- The issue is resolved
- The issue may have been caused by a temporary malfunction of the connected device.
- The issue is not resolved
- - INZONE H9 or INZONE H7
    Go to step 15.
  - INZONE H3
    The headphones may be malfunctioning and require repair. Go to Product Repair.
Reset the headphones.
Note: The Bluetooth pairing information and other settings are retained after the reset.
1. Connect the headphones to an AC outlet.
2. Press and hold the (power) button and (Bluetooth) button for about eight seconds or more.
- The issue is resolved
- The issue may have been caused by a temporary malfunction of the headphones.
- The issue is not resolved
- Go to step 16.
Initialize the headphones.
Note: Initialization returns the headphones to the factory settings and all Bluetooth pairing information is deleted.
1. Disconnect the USB Type-C™ cable and turn off the headphones.
2. Press and hold the (power) button and Bluetooth button for about 10 seconds or more.
- The issue is resolved
- The issue may have been caused by a temporary malfunction of the headphones.
- The issue is not resolved
- The headphones may be malfunctioning and require repair. Go to Product Repair.