Article ID : 00103626 / Last Modified : 04/27/2022Print

The self-diagnosis display (error code) such as E:62:11 and E:62:12 appears

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    These error codes appear when the self-diagnosis function works.

    As the camcorder is equipped with Balanced Optical SteadyShot, these errors may appear if excessive force is applied to the lens while the power is on. The protection of the lens driving circuit may be activated and the error codes may be displayed.

    If the error codes appear on the self-diagnosis display, remove and reinsert the battery to cancel the error.

    Note: When cleaning the lens, use a soft cloth to wipe the lens and be careful not to apply excessive force to it.