Applicable Models

This information is for the following models:

  • BDP-BX320
  • BDP-S2200
  • BDP-S3200

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

About this download

Benefits and improvements from the latest update

  • Removes the Gracenote function

Previous Benefits and Improvements

  • Resolves an issue where some Blu-ray titles cannot be played
  • Resolves an SSL security issue
  • Improves BRAVIA® internet Video connectivity
  • Improves BRAVIA internet Video connectivity to address the following concerns:
    • Netflix® Streaming Service may return to the Main page or an SSL alarm may appear
    • Launchpad screen may freeze during advertisements
    • Playback may crash for some internet services (Flixter, iComedy, Golflink.com)
  • Improves Wi-Fi® router connectivity

File Info

File Name

  • Firmware update M19.R.0181 for BDP-BX320/S2200/S3200

File Version

  • M19.R.0181

File Size

  • 90.1 MB (94,486,373 byte)

Release Date

  • 03-05-2019

Before You Start

Your firmware may already be up to date, especially if you have a new Blu-ray player model. If the version number is M19.R.0181 or higher, you do not need this update.

If you're not sure, it's easy to check which version of firmware you have:

  1. Turn on the TV and make sure it's tuned to the input to which the Blu-ray Disc player is connected (So if the player is connected to the HDMI 2 port, choose HDMI 2 as the input).
  2. Turn on the Blu-ray player.
    NOTE: If it starts to play a disc, press [STOP] and wait until you see the XrossMediaBar (XMB) menu screen.
  3. At the [XrossMediaBar] screen, use the arrow buttons on the remote control to select [Setup] > [System Settings] then select [ENTER].
  4. Select [System Information], and then press the [ENTER] button.
  5. The Software Version listed on the screen displays the current firmware version installed.
    If the version number is M19.R.0181 or higher, you already have the most recent firmware version.

There are 2 easy ways to update the firmware on your Blu-ray player:

Ways to update the firmware on your Blu-ray player
What you needWhy use this method?
internet / network
***RECOMMENDED***
  • An Ethernet cable or a wireless router to connect your Blu-ray player to the internet
  • To make sure your Blu-ray player is connected to:
    • an active internet connection
    • a compatible TV
We recommend this method as it's the easiest and quickest way to update your firmware.
USB storage device
  • A computer
  • A USB storage device
Update your firmware this way if you can't connect over the internet.

Download & Install

Updating over the internet

We recommend this method as it's the simplest way to update. It usually takes about 15-30 minutes. First set up the equipment, then download the update over the internet to your Blu-ray player.

What you need:

  • An active internet connection (using Ethernet cable or wireless router)
  • A compatible TV

How to make sure the update goes smoothly

Updating is usually very simple. Here's how you can make sure it goes right the first time:

  • Read the instructions carefully or you could end up damaging your Blu-ray player.
  • Don't turn off the Blu-ray player or disconnect it from power while it's updating.
  • Don't press any buttons, except the ones mentioned in the instructions.

Set up the equipment:

  1. Turn on the TV and make sure it's tuned to the input to which the Blu-ray Disc player is connected (So if the player is connected to the HDMI 2 port, choose HDMI 2 as the input).
  2. Connect the Blu-ray player to your internet source using an Ethernet cable or wireless connection via router.
  3. Turn on the Blu-ray player (If there is a disc in the player, take it out).

Get the update:

  1. At the [XrossMediaBar], use the arrow buttons on the remote control to select [Setup] > [Software Update] > [Update via internet] and then press [ENTER].
  2. The Software Update confirmation will be displayed on the TV. Select [OK] using the remote control, and then press [ENTER].
  3. The message "Update to a new software version" and the latest software version is displayed on the TV.
  4. Select [Start], and then press [ENTER]. The update process starts and is displayed on the TV.
  5. During the update, you will see the progress bar "x %" and the download capacity listed on the TV. The x changes to 0 and goes up to 100 during the update process.
  6. The player will reboot itself and the update will continue. Don't use or turn on the player during this step.
  7. The progress bar "x %" and the download capacity will appear again on the TV. The x changes to 0 and goes up to 100 during the update process.
  8. To complete the update, the player will automatically turn off and restart. Don't use or turn off the player until the update is complete.
  9. Check the firmware version. If the version number is M19.R.0181, the firmware update was successful.

Troubleshooting

What to do if you have problems updating your Blu-ray player firmware using the internet.

  • The message "Connection status cannot be confirmed" or "This device is not connected to network" shows on the TV.
    The problem might be with the network connection.
    1. For wired connection: make sure the LAN cable is connected between the player and the internet source.
    2. For wireless connection: make sure the wireless router is turned on and connected to an internet source.
    3. In the network settings, make sure you have confirmed whether or not your Blu-ray player has its own IP address (If you use a proxy server, type the IP address of the proxy you use, instead of the proxy host name, into the Proxy Server field).
    4. Confirm both "Physical Connection"' and "Internet Access" are showing [OK] in [Network Settings] ---> [Network Connection Status].
    5. Try the update again.

  • The power went off while the update was in progress.
    Turn the player on and try the update again.

  • The update has been going for over 30 minutes and hasn't finished.
    1. Disconnect the AC power cord from the outlet, then reconnect it after several minutes.
    2. Turn on the Blu-ray Disc player.
    3. Try the update procedure again.
    4. You can also directly cancel the network procedure and proceed directly and perform the update via USB memory.

  • While updating the message "Update failed" appears.
    • Ensure there is no problem with your network connection to the internet.
    • At the "Update failed" screen, select [OK] to try the update procedure again or [Cancel] to stop the process.
    • If the symptom persists, download the firmware file and perform the update via USB memory.
    • You can also directly cancel the network procedure and proceed directly and perform the update via USB memory.

  • After several attempts, the firmware update still does not work.
    1. Download the firmware file and perform the update via USB memory.

Update via USB Memory Device and your PC

We recommend you use the internet to update if you can. If not, you can use this method instead. You'll download the update to your computer, transfer it to a USB memory device, then transfer it to your Blu-ray player.

We recommend the following operating systems:

  • Microsoft® Windows® 10 / 8.1 / 7
  • Mac OS X® version 10.5 or later version

How to make sure the update goes smoothly

Updating is usually very simple. Here's how you can make sure it works the first time:

  • Read the instructions carefully or you could end up damaging your Blu-ray player.
  • Don't turn off the Blu-ray player or disconnect it from power while it's updating.
  • Don't press any buttons, except the ones mentioned in the instructions.

Download the update to your computer:

  1. Read and agree to the terms and conditions.
  2. Download the file UPDATE_M20R0181.zip to your computer (make note of this directory for your reference).
  3. Find the file on your computer, right-click the file and click [Properties]. Check that the size is 91.9 MB (96,430,168 byte)

Transfer the update files to the USB storage device:

  1. Extract the file to your computer. The extracted folder is called "UPDATE".
  2. Make sure that these four files are included inside the "UPDATE" folder: MSB19-FW.BIN, MSB19-FW.ID, MSB19-FW_MB.BIN and MSB19-FW_MB.ID
  3. Connect a compatible USB storage device to your computer.(FAT32 and NTFS are supported)

For Windows; operating system:

  1. Go to the directory where the folder was created, and Right-click the [UPDATE] folder.
  2. From the appearing menu, click "Send To..." .
  3. Click the drive that represents your USB device (e.g. Removable Disk E:).
  4. The update folder will be copied onto your USB device.

For Mac OS; X operating system:

  1. Drag and drop UPDATE folder to the root folder of the USB device.

Note: The update will not be performed if the file is not copied to the root directory of the USB device or if the name of the file is modified.

Transfer the update to your player

First get the equipment ready, then transfer the update to your player.

Get the equipment ready:

  1. Turn on the TV and make sure it's tuned to the input to which the Blu-ray Disc player is connected (So if the player is connected to the HDMI 2 port, choose HDMI 2 as the input).
  2. Turn on the Blu-ray player.
  3. Make sure no other USB devices are connected to Blu-ray Disc player, if there are, please unplug it from the Blu-ray Disc player.

Transfer the update:

  1. At the [XrossMediaBar], use the arrow buttons on the remote control to select [Setup] > [Software Update] > [Update via USB Memory] and then press [ENTER].
  2. The Software Update confirmation will be displayed on the TV. Select [OK] using the remote control, and then press [ENTER].
  3. The Software Update confirmation will be displayed. Select [Update via USB Memory], select [OK], and press [ENTER].
  4. The update starts.
  5. During the update, you will see the progress bar "x %" and the download capacity listed on the TV. The x changes to 0 and goes up to 100 during the update process.
  6. The player will reboot itself and the update will continue. Don't use or turn on the player during this step.
  7. The progress bar "x %" and the download capacity will appear again on the TV. The x changes to 0 and goes up to 100 during the update process.
  8. The player will turn off and restart automatically after the update is complete. Don't use or turn off the player until the update is complete.
  9. Take the USB device out of the player.
  10. Check the firmware version. If the version number is M19.R.0181, the firmware update was successful.

Troubleshooting

What to do if you have problems updating your Blu-ray player firmware using your PC and a disc.

  • I'm unable to select the option "Update via USB Memory"
    Please check the following:
    1. The USB device is properly connected to the Blu-ray Disc player
    2. The USB devices is formatted to support File System (FAT32 and NTFS)
    3. The USB devices is compatible with the Blu-ray Disc player

  • The update file I downloaded from the website cannot be extracted
    Did you download the file successfully? Try deleting the file and downloading it again.

  • The message "There is no update file" appears
    Make sure the extracted folder name is correctly named UPDATE (in capital letters) and that all the files are included inside:
    • MSB19-FW.BIN
    • MSB19-FW.ID
    • MSB19-FW_MB.BIN
    • MSB19-FW_MB.ID

  • The message "The file is corrupted" appears
    Please download the update file again and repeat the whole procedure again.
  • The update has been going for over 30 minutes and hasn't finished.
    1. Disconnect the AC power cord from the outlet, then reconnect it after several minutes.
    2. Turn on the Blu-ray Disc player.
    3. Try the update procedure again.
  • The power went off while the update was in progress.
    Turn on the Blu-ray Disc player and try the update procedure again.