Applicable Models

This information is for the following models:

  • SRS-HG1

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

About this download

Benefits and Improvements from the latest update

  • Improves secure communication
  • Makes Spotify Connect available to use, even with a free account

    IMPORTANT: This firmware update must be performed in order to keep using the Chromecast built-in music distribution service. If you do not manually install the update, it will be automatically installed at a time when there is an active network connection available, and the device is not being used.

Previous Benefits and Improvements

  • Improves secure communication
  • Added Speaker Add function
  • Added Voice guidance for Bluetooth pairing mode
  • Supporting Spotify Playback on Chromecast built-in
  • Operation and stability improvements
  • Added Multi Room function via Google Cast
  • Support music playback from SCMS-T devices via Bluetooth during Wireless Surround Function
  • Added "Wireless surround & Wireless Stereo" function
  • Support Hi-Res Audio Contents via Google Cast
  • Support mirroring function
    (Availability subjected to country by Google Inc.)

File Info

File Name

  • Firmware update 6.05 for SRS-HG1

File Version

  • 6.05

Release Date

  • 08-06-2019

Before You Start

Check the firmware version

If the version is displayed as "5.02" or lower, we strongly recommend for you to update the firmware.

If you're not sure, it's easy to check which version of the firmware you currently have:

  1. Connect the unit to the same Wi-Fi network as your smartphone, using "Sony | Music Center (SongPal)" application.
  2. Start up "Sony | Music Center (SongPal)" application on your smartphone.
  3. On the "Speaker & Group" screen, select "SRS-HG1".
    Speaker & Group
  4. Select "Settings".
    Settings
  5. On the "Settings" screen, select "Other Settings"
    Settings
  6. On the "Other Settings" screen, confirm the SRS-HG1 firmware version
    Other Settings

Download & Install

The software Update is available via internet (network). Please check the following steps.
Note: You cannot update to the latest software, if the set is NOT connected to the internet (network).
Important:

  • If the power indicator on the unit keeps flashing green, even after pushing the power button, push the "RESET" button located at the bottom of the unit.
  • Please make sure your unit is connected to a power outlet via the USB AC adaptor before starting the update.

  1. Connect to a power supply outlet. Use the USB AC adapter and supplied micro USB cable to connect the unit's DC IN 5V port to a power outlet.
    Note: The software update cannot be performed when using battery power only.
  2. Connect to the internet (network).
    • Connecting using "Sony | Music Center (SongPal)" application on your mobile device.
    • Connecting via Wi-Fi Protected Setup (WPS).
    • Connecting using a PC.

    Note: For additional details, refer to the product instruction manual.
  3. If the speaker is turned on, press the ON/Standby button (ON/Standby) button, and turn it off.
  4. Plug the AC power cord connected to the AC adaptor into an AC outlet securely
    Note: The software update cannot be performed when the unit is only relying on the battery for power.
  5. Press the ON/Standby button (ON/Standby) button to turn the power on.
  6. Wait until the LINK indicator stops flashing and stays lit in orange. Whenever a software update becomes available, the "WPS/UPDATE" button lights up.
    WPS/UPDATE button
  7. Tap and hold the "WPS/UPDATE" button until you hear beeps. When the software update starts, the "WPS/UPDATE" button starts flashing.
    Note: The speaker is not operational while updating.
  8. The blinking (interval and condition) of the "WPS/UPDATE" button changes during the update progress.
  9. The "WPS/UPDATE" button turns off and the speaker switches to standby mode or "BLUETOOTH/Network" standby mode automatically after the update is completed.
  10. Check the version by following the steps described under Check the firmware version to confirm the update has been performed successfully.

Questions & Answers

All the function LEDs are lit up

The software update failed. Press the ON/Standby button (ON/Standby) button to turn off the speaker, then turn it on again. Make sure the speaker is connected to the internet and the "WPS/UPDATE" button is lit, then start updating again.