IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • STR-DH810

About this download

Benefits and improvements

This utility updates the STR-DH810 Multi Channel AV Receiver system software to add support for 3D features.

System Requirements

Operating Systems

  • Mac OS® X
  • Windows Vista®
  • Windows Vista® 64-bit
  • Windows® 7
  • Windows® 7 64-bit
  • Windows® XP
  • Windows® XP MCE

Before You Start

Check the Current Software Version

Please follow the steps below check the current software version to determine if your STR-DH810 Multi Channel AV Receiver needs a system software upgrade to support 3D features.

Front Panel Controls
  1. Press On/Standby Button (on/standby) to turn off the receiver.
  2. While holding down the "INPUT MODE" and "DISPLAY" buttons, press On/Standby Button to display the software version.
  3. If the software version shown on the receiver display is "VER 1.013" or "VER 1.022", please continue to the next section. Note: This upgrade can only be installed if the current software version is 1.013 or 1.022.
  4. Press On/Standby Button to turn off the receiver.

Check the Serial Number

Only STR-DH810 Multi Channel AV Receiver units within a certain serial number range require this update to support 3D features.

Serial Number Location

The 7-digit serial number can be found near the lower right corner on the back of the receiver.

Please enter the serial number without any spaces, and then click "Continue".

If you have any questions or require assistance, please call Sony Support at 239-768-7547.