WAIT - Read the Required Files section before downloading this file.

Required Downloads

Unless stated otherwise, the file listed below must be installed BEFORE the System Software Update (Mac) in order for it to work properly. If more than one Required file is listed, install them in the order presented on this page.

This utility is required only for Macintosh® OS X 10.10 and 10.11

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • DSCHX60V

About this download

Benefits and improvements

  • This utility updates the camera firmware to version 2.10 and provides the following benefits:

    Improvements over version 2.00:

    • Improves the power-on time after downloading the Smart Remote Control application of the PlayMemories Camera Apps™

    Benefits provided by previous updates and included in version 2.10:

    • Enables remote movie shooting using a smartphone
      • The pre-installed smart remote control application of the PlayMemories Cameras Apps™ supports only still images on the DSC-HX400V and DSC-HX60V cameras.
      • For movie shooting, using the smart remote control function, ensure the "PlayMemories Mobile" app is updated to the latest version (Ver. 3.10 or later). It will be available at the beginning of November from the Google Play™ online store for Android™ devices and from the iTunes® App Store for iOS devices.
    • Functional improvements

System Requirements

Operating Systems

  • Mac OS X®

File Info

File Name

  • Update_DSCHX60VV210.dmg

File Version

  • 2.10

File Size

  • 209844609 bytes

Release Date

  • 30-10-2014

Before You Start

Determine if Your Camera Needs the Update

This update is only for DSC-HX60 and DSC-HX60V cameras that currently have firmware version 2.00 or earlier. If your camera firmware version is already version 2.10, this update is not necessary.

Check the version of your camera firmware:

  1. Power on the camera.
  2. On the camera, select "MENU", "General Settings", and then "Version".
  3. If the version number is Ver. 2.10, the camera does not need this update.
    Main Settings Version Number

Important Notes

  1. Remove the memory card from the camera
  2. Ensure the camera battery is fully charged.

Download & Install

Download and Update the Firmware

  1. Download the Update_DSCHX60VV210.dmg file to a temporary or download directory (please note this directory for reference).
  2. Go to the directory where the file was downloaded and double-click the Update_DSCHX60VV210.dmg.
    Note: Do not connect the camera to the computer yet.
  3. Double-click the "Firmware Updater" Firmware Updater Icon icon.
  4. At the Password prompt screen, enter the Name and Password for the administrative account, and then click "OK".
    Password Prompt Screen
  5. At the "Firmware Updater" screen, please follow the instructions.
  6. Power on the camera.
  7. Make sure the USB Connection Setting is set to "Mass Storage".
    On the camera, select "MENU", "Setup","USB Connection", and then ensure "Mass Storage" is selected.
    USB Connect Screen
  8. Ensure the memory card is removed from the camera.
  9. Connect the camera to your computer using the supplied USB cable.
    Note: When the camera is connected to the computer, the LCD screen of the camera turns off. If the LCD screen of the camera dose not turn off, try disconnecting and reconnection the USB cable or try another USB port on the computer. Then proceed to the next step.
  10. At the "Firmware Updater" screen, click "Next".
    Connect the camera Screen
    WARNING!: Do not power off the camera or disconnect the USB cable until the update process is complete.
  11. When the updater recognizes the camera connection, the next "Firmware Updater" screen is displayed on the computer, and the camera screen displays "Follow the instructions on the computer".
    camera Screen
  12. At the "Firmware Updater" screen, click "Next".
    camera Connected Screen
  13. When the following screen is displayed, check the version number at the lower left.
    Current Version Screen
    If the current version is "2.00 or earlier", click "Next".
    Note: If the current version is "2.10", your camera does not need this update. Stop the USB connection and click "Finish". Then power off the camera, briefly remove the battery pack or the AC adaptor, and then power on the camera again.
  14. To perform the firmware update, follow the steps to reset the camera.
  15. Reset the camera:
    On the camera, press the center of the control wheel to execute reset.
    Initialize Camera
    Note: The camera screen turns off when the button is pushed.
  16. At the "Firmware Updater" screen, click "Next".
    Click Next Screen
  17. After resetting, reconnection of the camera is verified, and the next Firmware Updater screen appears.
  18. When the following screen is displayed, click "Run".
    Note: The update process takes about fifteen minutes to complete.
    Run the Update Screen
    WARNING!: Do not power off the camera or disconnect the USB cable until the update process is complete.
  19. When the following screen is displayed, click "Finish".
    Update Complete Screen
  20. You may now disconnect the USB cable.
  1. On the camera, select "MENU", "Setup", and then "Version".
  2. If the version number is Ver. 2.10, the camera firmware was successfully updated.
    Main Settings Version Number