Sony Support

STR-DA5800ES/DA2800ES AV Receiver Firmware Upgrade

    Applicable Models
    About this download
    System Requirements
    Preparation
    Download & Install

    IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

    This information is for the following models:

    • STR-DA2800ES
    • STR-DA5800ES

    About this download

    Benefits and improvements

    IMPORTANT!! This update is available only by performing a Network Upgrade.

    This firmware upgrade is currently available to provide the following benefits:

    Model: STR-DA2800ESVersion: 1065
    Model: STR-DA5800ESVersion: 1066

    Improvements over version 1061/1062

    • Improved playback quality for FLAC audio format content

    Benefits provided by previous updates and included in versions 1065/1066:

    • Improved connectivity for the BRAVIA® Internet Video service
    • Improved playback quality for Dolby Digital Plus (DD+)
    • Improved stability for Home Automation features
    • Adds support for the following HDMI® Version 2.0 specification for 4K/60p signals:
      • 3840x2160p @ 59.94/60Hz (YCbCr 4:2:0 / 8bit only)
      • 3840x2160p @ 50Hz (YCbCr 4:2:0 / 8bit only)
      • 4096x2160p @ 59.94/60Hz (YCbCr 4:2:0 / 8bit only)
      • 4096x2160p @ 50Hz (YCbCr 4:2:0 / 8bit only)
    • Adds playability for DSD (Direct Stream Digital) files via USB and DLNA® devices
    • Adds playability for ALAC (Apple® Lossless Audio Codec) and AIFF (Audio Interchange File Format) files via USB and DLNA devices
    • Adds up-scaling capability to the 4k signal for HDMI 1080p/24Hz input signals
    • Adds support for additional compatible lighting devices
    • Adds vTuner support
    • Adds support for simultaneous HDMI A+B output
    • Improved detection reliability for the Lighting Control Adapter (UWA-C4Z)
    • Improved playback quality via DLNA devices

    System Requirements

    Operating Systems

    • System Software

    Before You Start

    Check the Current Firmware Version

    1. Power on the television and make sure it is tuned to the inputs to which the AV receiver is connected.
    2. Power on the AV receiver.
    3. On the AV receiver remote control, press the AMP button, then the HOME button, and then wait until the home menu is displayed on the television before proceeding.
    4. Use the arrow keys on the remote control to select "Settings", and then press the ENTER button.
    5. Use the arrow keys to select "System Settings", and then press the ENTER button.
    6. Use the arrow keys to select "System Information", and then press the ENTER button.
    7. The firmware version currently installed on the AV receiver will be listed on the television screen.
      Firmware Version
      If the version number is 1065/1066 or higher, it is not necessary to install this firmware upgrade.

    Download & Install

    Table of Contents

    Network Upgrade Instructions

    The STR-DA5800ES/DA2800ES AV receiver firmware can only be upgraded by performing a Network Upgrade.

    • Important Notes
      • If you have not done so already, please check the current firmware version to determine if this firmware upgrade is needed for your AV receiver.
      • WARNING!! Please follow the upgrade instructions carefully. Failure to follow the instructions may interrupt the upgrade process and may cause the AV receiver to be unresponsive or to require repair.
      • WARNING!! Do not power off the AV receiver or disconnect it from the AC power outlet. Loss of power during the installation of the firmware upgrade may cause the AV receiver to be unresponsive or to require repair.
      • In order to perform the network upgrade it is necessary to have the receiver correctly connected to an active Internet connection.
      • In order to perform the firmware upgrade, it is necessary to have the receiver correctly connected to a compatible television.
      • It is highly recommended that you print out these instructions for use as a reference during the installation process.
    • Firmware Upgrade Instructions

      WARNING!! Please follow the upgrade instructions carefully. Failure to follow the instructions may interrupt the upgrade process and may cause the AV receiver to be unresponsive or to require repair.

      Note: The firmware upgrade process usually takes about 15 to 50 minutes, depending on system configuration and network connection.

      1. Power on the television and make sure it is tuned to the inputs to which the AV receiver is connected.
      2. Connect the LAN port (switching hub) LAN port on the receiver to your Internet source using an Ethernet cable.
      3. Power on the AV receiver.
      4. On the AV receiver remote control, press the AMP button, then the HOME button, and then wait until the home menu is displayed on the television before proceeding.
      5. At the home menu, use the arrow keys on the remote control to select "Settings", and then press the ENTER button.
      6. At the Settings menu, use the arrow keys on the remote control to select "Network Update" and then press the ENTER button.
      7. The message "Perform version update?" is displayed on the television.
      8. Select "OK" and then press the ENTER button.
      9. The download process starts and the download screen is displayed on the television.
      10. During the download the message "DL */9" is displayed on the television screen.
        Note: The "*" changes to "0" through "9," indicating the download progress.
      11. After the download is complete, the upgrade starts and the ON/STANDBY light on the front panel starts blinking.
      12. After the upgrade is completed, the AV Receiver will automatically restart.
      13. Check the current firmware version to confirm that the upgrade has successfully installed.
        Note: If the version number is 1065/1066, the firmware upgrade was successful.

      If you have questions or require assistance, please contact Sony Support at 1-866-909-SONY (7669).


    • Network Firmware Upgrade FAQ

      Q: When running the network upgrade, the television displays the message, "Connection status cannot be confirmed" and you cannot perform the firmware upgrade.

      A: There may be a problem with the network connection. Verify that the network connection and settings are correct.

      1. Check the Ethernet cable to make sure it is securely connected to the LAN port (switching hub) LAN port on the receiver and to the Internet source.
      2. Check the AV receiver network settings and confirm that the receiver has its own IP address.
        Note: If you use a proxy server, enter the IP address of the proxy server you use, instead of the proxy host name, in the "Proxy Server" input field.
      3. Follow the Network Upgrade Instructions again.


      Q: The power was shut down during the upgrade process.

      A: Power on the AV receiver and then follow the Network Upgrade Instructions again.


      Q: The network upgrade process has two parts, first the download and then the upgrade. If, after the download part is finished, the firmware upgrade process is still not finished after running more than 60 minutes.

      A: Please contact Sony Support at 1-866-909-SONY (7669).