Article ID : 00249529 / Last Modified : 10/22/2020

How to use a Sony camera to live stream with Imaging Edge Webcam software

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    The Imaging Edge Webcam software allows you to utilize your Sony camera for livestreaming through the USB connection.

    Before you start

    • The software is compatible with the Microsoft® Windows® 10 (64-bit) operating system and Apple® macOS® operating system with the latest updates installed.
    • The software doesn't process audio signals. Use the computer's built-in microphone or an external microphone.
    • If your camera isn't supported for USB streaming, you may be able to use your camera to live stream using the HDMI® port.
    • If your camera has a USB Power Supply option, set it to ON.
    • We recommend to disable the sleep mode of the computer before using Imaging Edge Webcam software.

    Steps to install and use the software

    1. Verify that your camera is supported, select your model, and install the Imaging Edge Webcam software on your computer (restart the computer after the install).

      View the video or skip to the steps below.

    2. Turn on your camera.
    3. Depending on your model, follow these setup steps before connecting your camera to the computer:

      ILCE-9M2 or ILCE-7C/7RM4



      Other supported cameras

    4. Connect the camera and computer using the supplied USB cable.
      • The camera will not connect if the Imaging Edge Desktop (Remote) software is active. Exit this software and then connect the camera.
    5. Place the camera in the proper mode:
      • For the ILCE-7M2, ILCE-7S, ILCE-7SM2, ILCE-7RM2, ILCE-5100, ILCE-6300, ILCA-68, ILCA-77M2, DSC-RX1RM2, DSC-RX10M2, DSC-RX10M3, DSC-RX100M4, or DSC-RX100M5:
        • Set the camera mode to (Auto Mode). After the livestreaming/web conferencing service and video starts, change to movie mode.
      • For all other cameras:
        • Set the camera to movie mode.
    6. Launch the live distribution/web conferencing service on your computer.
      • You may need to install additional software or register an account.
    7. Change the appropriate setting in the live distribution/web conferencing service to switch to the connected Sony camera.
      • The settings will differ depending on the service you are using. Check the user's manual or help page of the service.


    • The aspect ratio is automatically set to 16:9 when using the Imaging Edge Webcam software and will remain on that setting after use. You'll need to set it to a previous value if necessary.
    • The resolution of Imaging Edge Webcam software is 1,024 x 576 pixels.
    • If you want improved resolution, you are using an operating system other than Windows® 10 64-bit or macOS 10.13 - 10.15, and your camera has a HDMI port, then information is available to explain how to livestream without using the Imaging Edge Webcam software.

    Troubleshooting tips

    The following information will vary depending on the operating system

    Windows OS