CREATORS' CLOUD
    Creators' App

    Uploading starts at other times than when performing operations* to upload to the cloud.

    Check that the camera is set to the correct date and time. In addition to normal upload start operations*, uploading may also start at the following times, depending on the network environment or the camera’s network usage.
    *Upload start operations will vary depending on the camera you are using and the upload destination (setting the camera’s power switch from OFF to ON, or selecting [Cloud Connection] in the camera menu, etc.)

    • When [Cloud Connection] is changed from [Off] to [On] in the camera MENU.
    • When operations such as the following are performed with [Cloud Connection] set to [On] in the camera MENU.
      • Disconnecting the cable after ending USB connection.
      • Changing [Wi-Fi Connect] from [Off] to [On] in the camera MENU.
      • Changing [Airplane Mode] from [On] to [Off] in the camera MENU.
      • Temporarily disconnecting and then resuming the network connection.
      • Using and then exiting another app (Transfer & Tagging or Creators' App for enterprise).
    • When the connection between Creators' App and the camera is changed from a connection that does not go through an access point to one that goes through an access point (you can check this on the Camera screen of Creators' App).