Article ID : 00029262 / Last Modified : 12/21/2009Print

What are the +CMS ERROR codes?

    The following is a list of +CMS ERROR: (error code) errors when attempting to access the EDGE module with a terminal application.

    NOTE: The +CMS ERROR indicates an error related to a mobile equipment or network. If the error is the result code for any of the commands in a command line, none of the following commands in the same command line are executed. (Neither ERROR nor OK will be returned.) An error is returned normally when the error is related to syntax or invalid parameters.

    Error Code Error Description
    0 through 127 GSM 04.11 [14] Annex E-2 values
    128 through 255 GSM 03.40[9] subclause values
    300 ME failure
    301 SMS service of ME reserved
    302 operation not allowed
    303 operation not supported
    304 invalid PDU mode parameter
    305 invalid text mode parameter
    310 SIM not inserted
    311 SIM PIN required
    312 PH-SIM PIN required
    313 SIM failure
    314 SIM busy
    315 SIM wrong
    316 SIM PUK required
    317 SIM PIN2 required
    318 SIM PUK2 required
    320 memory failure
    321 invalid memory index
    322 memory full
    330 SMSC address unknown
    331 no network service
    332 network timeout
    340 no +CNMA acknowledgement expected
    500 unknown error