This information is for the following models:
About this download
Benefits and improvements from the latest update
- Provides an Android security update
Previous Benefits and Improvements
The following benefits and improvements are also included in this update.
- Removes the Neulion 4K Live Streaming Service (SDK)
- Adds support for the Home Theater Control app
- Improves HDMI® video range setting
- Improves performance with HDR content
- Improves general performance of the TV
- Improves video freeze and lip sync conditions during Amazon Prime® video playback
- Corrects a condition where a short beeping sound is heard when changing channels
- Updates the system software to Android™ N (Nougat)
- Improves the general performance of the television
- Adds support for 4K Live/NeuLion® Sports digital video technology
- Improves RVU support
- Adds Twin Picture (PAP function) support
- Resolves a condition where a black picture may occur after performing a remote Off/On (KDL-75W850C)
- Supports PlayMemories Online service
- Supports PlayStation™ Now service
- Improves Wi-Fi® connectivity of the TV
- Improves picture quality (dynamic range, noise reduction, sharpness)
- Supports Netflix® streaming service
- Improves Lip Sync for HDMI input
- Improves performance and stability of the USB video playback features
- Resolves a condition where a black screen and no sound may occur when an input changes from YouTube® to another input
- Resolves a condition where a black screen may occur during USB video playback
- Supports Internet based EPG (Electronic program guide)
- Supports Amazon®, Pandora®, and Crackle™ applications
- Supports Force Reboot by holding down the Power button on the BT or IR remote controller
- Improves performance and stability of overall UI operation
- Improves performance and stability of the Action Menu
- This file is only for use with the models identified. Not all models are sold in all countries.
What You Need
- a computer with access to the Internet
- a USB storage device
- Firmware update to v5.435 for TV
Zip File Name
- 1 560 857 711 bytes
Before You Start
Check the software version
Your software may already be up to date. If you're not sure, it's easy to check which version of software you have by following these instructions:
- Press the [HELP] button on the remote.
- On the TV screen, the firmware version number should appear.
 Software version
If the version number is "PKG5.435.xxxx" or higher, you already have the most recent software version and updating is not required.
There are 2 ways to update the firmware on your BRAVIA TV:
- Using the "Automatic software download" function (recommended)
NOTE: Your TV may indicate the "Software is up to date" even if the newer version is not installed. The updates for Automatic software downloads are staggered releases and may not be immediately available. Please try again later. If you prefer to update now, follow the instructions to download and install the software update using the USB storage device method.
- Using a USB storage device
Using the "Automatic software download" function (recommended):Sony provides software updates in order to enhance functionalities and provide users with the latest TV experience. The easiest way to receive software updates is via an Internet connection of the TV.
NOTE: Make sure that the "Automatic software download" function is enabled (by default, this setting is enabled).
- Press the [HELP] button on the remote.
- Select [System software update].
- Select [Automatic software download].
IMPORTANT: The following "System Requirements", "File Info", and the "Download & Install" sections relate to the USB storage device update procedure. You can ignore them if you completed the update using the "Automatic software download" feature.
For other FAQs about Troubleshooting, please see the "Questions and Answers" on the Sony Support Site.
Using a USB storage device:
You can also update the software by using a USB storage device. If an Internet connection is not set up on your TV, or the "Automatic software download" function fails to download, try to download and update using a USB storage device as instructed below.
Download & Install
- Read the instructions carefully or you could end up causing the TV to become unresponsive or require a repair.
- Do not turn off the TV or disconnect it from power while it's updating.
- Do not press any buttons, except the ones mentioned in the instructions.
- Stop any recording before you start the firmware update (USB HDD recording models only).
How to download the Updater:
Before you install the update, you'll need to download it from the Internet and save it to a USB storage device.
- Download the update file to your PC.
- Click the [Download] button on the top of this page, then read and accept the terms and conditions.
- Click the [Download] button on the bottom of the page to download the update file on your PC.
- Verify the downloaded file name and size.
- Go to the directory where the file was downloaded.
- Verify that the size of the "sony_tvupdate_2015_5435_naa_auth.zip" file is "1 560 857 711" bytes.
NOTE: For Windows PC, verify the "Size" instead of "Size on disk" on the Properties screen.
- Extract the downloaded file.
After you extracted the downloaded file, you will find the file "sony_dtv0FA50A09A0A9_00004300_153b00b8.pkg".
- Insert the USB storage device into your PC.
- Copy or drag and drop the file "sony_dtv0FA50A09A0A9_00004300_153b00b8.pkg" to the root directory of your USB device.
NOTE: The "root directory" is the first or top-most directory of the device, which contains all the other folders.
- Remove the USB storage device from your computer and continue to the next section.
Step 1: Install the update
Once you've downloaded the update file and prepared your USB device, you can install it on your TV. The process can take up to 30 minutes and during the installation your TV will turn off before turning itself back on. Please follow the simple steps below:
- Turn on the TV.
- Make sure that no USB devices are inserted into your TV.
- Insert your USB storage device containing the file "sony_dtv0FA50A09A0A9_00004300_153b00b8.pkg" into a USB port of the TV set.
NOTE: Any USB slot can be used if the TV has multiple USB ports.
- Once the USB storage device has been detected, a series of different messages will appear on the TV set. Follow the on screen instructions.
NOTE: If the messages do not appear automatically, try turning the TV off and on with the remote control.
- When the file is finished copying from the USB storage device, the update process will begin, the POWER indicator on the TV will begin flashing white, and the update progress screen is displayed on the TV.
- After several minutes, the TV will turn off and then turn back on to complete the update.
WARNING: During the software installation process, please do not:
- Remove the USB device
- Turn off the TV
- Disconnect the TV from the power supply
- When the software update is complete, a message appears on the TV indicating the software update is complete.
- Carefully remove the USB device from the USB slot.
Step 2: Check that the update was successfulCheck the current software versionto confirm that the update has successfully been installed.
- If the version number is "PKG5.435.xxxx", the software update was successful.
- If the version number isn't "PKG5.435.xxxx", download and install the update again.
Questions & Answers
- Will my personal settings be deleted after the update?
No, all your personal settings will be kept.
- Can I install an older version of the software?
No. To ensure that your TV remains at optimum performance, the installation of an older software version is not possible. The latest software version contains all the benefits and improvements of previous versions.
- Is it normal for the TV to turn off during the update process?
Yes, it's normal for the TV to restart during the update process. It will take longer for the TV to restart while installing the new software.
What to do if you have problems updating your TV firmware
If either message "An error occurred during the software update" or "Software cannot be updated using this USB device" is displayed on the TV screen, please proceed to the following procedures for a possible solution:
- Make sure your USB storage device is in good working order. If it is, try downloading the update file again.
- Turn off the TV by pressing the [POWER] button on the TV set.
- Press the [POWER] button again, and proceed with the installation process again.
If the message "No newer version of the TV software was found" is displayed on the TV front panel display, your TV already has newest software version installed, so you don't need to update it.
For other FAQs about Troubleshooting, please see the "Questions and Answers" section on the Sony Support Site.