IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • KDL-22EX308
  • KDL-32EX308
  • KDL-32EX700
  • KDL-32EX710
  • KDL-40EX700
  • KDL-40EX703
  • KDL-40EX710
  • KDL-40HX701
  • KDL-46EX700
  • KDL-46EX701
  • KDL-46EX703
  • KDL-46EX710
  • KDL-46EX711
  • KDL-46HX701
  • KDL-52EX700
  • KDL-52EX701
  • KDL-52EX703
  • KDL-55EX710
  • KDL-55EX711
  • KDL-55HX701
  • KDL-60EX700
  • KDL-60EX701
  • KDL-60EX703

About this download

Benefits and improvements

This software update (version 4.131) provides the following benefits:

  • Enables Transport Layer Security 1.0 (TLS1.0) to enhance security of internet applications
  • Improves reliability to the Secure Sockets Layer 3.0 (SSL3.0)

Benefits provided by previous updates and included in version 4.131.

System Requirements

Operating Systems

  • System Software

File Info

File Name


File Version

  • 4.131

File Size

  • 32.11 MB

Release Date

  • 01-13-2015

Before You Start

Before You Start

  • Follow the update instructions carefully.
  • All user settings are retained during the firmware update.
  • It is normal for the TV set to restart during the update process. The TV set may take longer than usual to restart as it's installing the new firmware.
  • User settings will not be changed by the update.
    • Do not operate, turn off, or disconnect the TV from the AC power source during the upgrade process.
    • Failure to follow the instructions, or an interruption in the update process, may cause the TV to become unresponsive or to require repair.
    • After performing this update, it isn't possible to return to or install a previous version of the system software. By downloading and installing this update, you acknowledge that you understand this update can't be reversed.

Download & Install

Installation Instructions

Determine if you need this update
Check the Firmware Version of the TV
Choose how to install this update
OPTION 1 - Network Update Method (Recommended)

The Network update is straightforward and the easiest way to update your TV. To use this method, your TV must be connected to your network connection to the internet (512Kbps or faster). If you have a slower connection speed, use the USB Storage Device method instead.

Network Update Instructions
OPTION 2 - USB Storage Device (USB) Update Method

With this method, use a PC to download the firmware update, transfer the update file to a USB storage device, and then install it from the USB storage device onto your TV. You will need a USB storage device with at least 32.1 MB of space available and formatted for the FAT32 file system. If you're using a USB device for playback of photos, music, or videos on your TV, the same USB device type should work for this update. If the software update is not successful after following the instructions, you may need to format your USB device to the FAT32 file system, or use a different device.

USB Instructions

Either message, An error occurred during the software update or Software cannot be updated using this USB device is displayed on the TV.

  • Verify your USB device is in good working order and then perform the download and update process again.
  • Press the POWER button on the TV to turn it off, and then back on, and then perform the installation process again.
    Note: If the message No newer version of the TV software was found is displayed, your TV already has the newer firmware installed.