KDL-40XBR5

Programming Codes

Select the brand name from the drop-down list for each device for which you want to see codes.
If your device brand is not listed, try the codes listed for other brands.

AV Receiver
Blu-Ray Disc Player
Cable Box
DVD Changer
DVD Player
DVD/VCR Combo
Digital Satellite receiver
Digital Video Recorder
Hard Drive/DVD Combo
VCR

Follow these steps to program the remote control.

  1. On the remote control, press and hold the INPUT button.
  2. While holding down the INPUT button, press the appropriate FUNCTION button for the component being programmed.
  3. Release the both buttons. Notes:
    • The FUNCTION button will illuminate and should remain illuminated through the end of the procedure.
    • Each subsequent step in this procedure must be completed within 10 seconds of the previous step.
  4. Press the number buttons to enter the numeric code corresponding to the component and the make of the component to be controlled. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  5. While the FUNCTION button is still lit, press the menu select button.

Note: The FUNCTION button will blink twice if programmed correctly. If not, it will blink five times.