KV-40XBR800

Programming Codes

Select the brand name from the drop-down list for each device for which you want to see codes.
If your device brand is not listed, try the codes listed for other brands.

Cable Box
DVD Player
Digital Satellite receiver
Laser Disc Player
VCR

Follow these steps to program the remote control.

To control a VCR or DVD:

  1. Turn on the VCR or DVD.
  2. Open the lid of the remote control.
  3. On the remote control, move the AV1/2/3/DVD switch to AV1, 2 or 3 for a VCR, or DVD for a DVD player.
  4. Press the CODE SET button.
  5. Close the lid of the remote control.
  6. Press the FUNCTION DVD/VCR button.
  7. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  8. Press the ENTER button.
  9. Open the lid of the remote control.
  10. Point the remote control at the component.
  11. Press the POWER button to verify operation.

To control a cable box or digital satellite receiver:

  1. Turn on the cable box or satellite receiver.
  2. Open the lid of the remote control.
  3. Press the CODE SET button.
  4. Close the lid of the remote control.
  5. Press the FUNCTION SAT/CABLE button.
  6. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  7. Press the ENTER button.
  8. Release the CODE SET button.
  9. Point the remote control at the component.
  10. Press the SAT/CABLE power button to verify operation.