IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.
Follow this procedure to troubleshoot no display on the LED screen.
IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product.
- Verify that the receiver is turned on.
- Verify that the LED display has not been set to a dim setting that is too dark to see.
- Unplug the AC power from the receiver for 15 seconds.
NOTE: The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. Go to Product Repair.