The reset method differs depending on the product. If your model isn't listed below, check the product
manuals
![]()
for instructions.
Note: The settings return to their initial status. Settings such as volume, function, sound settings, and personal information stored on the system may be changed.
HT-S100F
HT-CT290/HT-CT800/HT-G700/HT-S2000/HT-S200F/HT-S350/HT-X8500/HT-X9000F/HT-Z9F
- Press and hold the
(power) and - (volume down) buttons on the Soundbar for more than five seconds. - Unplug the AC power cord.
- Plug the AC power cord back in, and press the (power) button to turn on the unit.
HT-RT3
- Press and hold INPUT, VOL – and （power） simultaneously for more than 5 seconds.
- Disconnect the AC power cord, and then plug it back in.
HT-G700/HT-S400
- Press and hold the (power) and - (volume down) buttons on the Soundbar for more than five seconds.
- Unplug the AC power cord.
- Plug the AC power cord back in, and press the (power) button to turn on the unit.
HT-S40R
- On the remote control, press the MENU button.
- Select RESET by pressing the ↑ (upper) or ↓ (lower) button.
- When ALL RESET appears on the front panel display, press the ENTER button, and then the system settings return to the factory default.
HT-A3000/HT-A5000/HT-A7000/HT-A9
- On the remote control, press the MENU.
- Select Setup → Advanced Settings.
- Select Resetting.
- Select the menu item you want to reset.
- Select Start.
If you can't perform the reset using the Home Menu:
- HT-A9: Press and hold the (power) button on the control box for more than 10 seconds.
- HT-A3000/HT-A5000/HT-A7000: Press and hold the (power) button and - (volume down) button on the bar speaker for more than five seconds.
