Article ID : 00111782 / Last Modified : 05/11/2017Print

Remote Control Codes for the Set-top box or the A/V Receiver Don't Work when Setting up the IR Blaster on an Android TV

    Before You Start

    Make sure that the IR Blaster is positioned properly in front of your A/V receiver's IR sensor.

    Steps to Follow if the Codes for the IR Blaster Setup Don't Work

    1. On the supplied remote control, press the HOME button.
    2. Select Settings.
    3. Under TV category, select External Inputs.
    4. Select IR Blaster setup.
    5. Select Supported Model List.
      • For set-top box, select Set-top box.
      • For A/V receiver, select AV receiver.

    IMPORTANT: If the manufacturer of your set-top box or A/V receiver is not listed, the IR Blaster that came with your Android TV™ won't work. Use the remote control supplied with the set-top box or A/V receiver to operate it.