IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.
The optical jack is designed to output sound when the video you're watching contains digital audio (PCM or Dolby Digital® technology). This feature is available on certain digital broadcasts and streaming video, and isn't supported on standard cable or analog stations.
If the video doesn't contain a digital audio signal, then you won't hear a sound through this connection. You may use a secondary analog connection to pass the audio signal in this situation.
Sound sent to the TV through an HDMI® connection, or other input, may not output through the optical jack. In this case, you should connect the optical jack from the source device (Blu-ray Disc™ player, DVD player, etc.) directly to the home theater, or stereo system to get sound.
- The connected home theater system, audio receiver, or soundbar isn't set to properly decode the digital signal.
- Your TV isn't set to a digital channel, or playing video that is encoded in 5.1 audio.
- The optical cable isn't securely connected.
- The optical cable may be faulty.
- Your TV isn't updated with the latest software version.
- The connected third-party sound bar, or home theater system may not be compatible with your TV.
Troubleshoot No Sound through the Optical output port
Check if you can hear sound after you complete each step.
- Set the home theater or stereo system to the appropriate input and mode for the optical connection.
- Securely connect one end of the optical digital cable to the optical out on your TV.
- Connect the other end to the optical in on your home theater or stereo system.
- The optical cable works properly if you see a red light on both ends.
- Try changing the channel on your TV to another digital broadcast.
- Go into the Sound, or Speakers menu of the TV, and select External Speakers or Audio System.
- Some TVs require that the internal speakers be turned off before outputting the audio signal to another device. This step turns off the internal speakers.
- For Android TV™ models, set the Digital Audio Out settings to PCM. Perform the steps below if your audio system isn't compatible with Dolby Digital or DTS.
- Press the HOME button.
- Select Settings.
- Under the TV category, select Sound or Display & Sound.
- Select Audio output.
- If you don't find this option, go to the next step.
- Select Digital audio out.
- Select PCM.
- Update your TV to the latest system firmware.
- Try a different optical cable.
- If the issue still occurs, disconnect the optical cable and use an analog connection to output the sound from the TV to the audio system.
- If the signal comes from your source devices such as cable set-top box, satellite receiver, or DVR, you can also use an optical cable to connect the source to the audio receiver.
- Perform a factory reset.