This information is provided to help you when it is difficult to remove the table-top stands in order to change the height and position of the table-top stand, mount the TV on a wall, or re-box the TV.
- X90J_X91J_X92J_X93J_X94J (50”/55”/65”/75”)
- X85J_X86J_X89J (43”/50”/55”/65”/75”/85”)
- X79J_X80J_X81J_X82J (43”/50”/55”/65”/75”)
Before you start
- Three or more people are required to handle the TV to detach the stands.
- A standard flat-head screwdriver is required to detach the stand. It's recommended to add tape to the tip of screwdriver to prevent scratching the TV.
- Avoid the use of excessive force while detaching the table-top stands from the TV as it may cause the TV to fall resulting in personal injury or physical damage to the TV.
- As you detach the table-top stands, be careful when lifting the TV because the table-top stand may fall and cause injury or damage to the surface that the TV is sitting on.
- If you are mounting the TV on a wall, make sure all mounting hardware is installed on the back of the TV and the wall prior to removing the stands.
Instructions to remove the stand
Instructions are provided to remove the table-top stand from an upright position or when lying face down. Follow the instructions for the desired method.