Article ID : 00016908 / Last Modified : 05/25/2022Print

Error message appears when streaming apps

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    Follow the instructions provided below based on the error code you encounter.

    Error 1106

    1. Make sure the router is connected to the internet.
    2. Perform a Network Setup again.
    3. Set the IP address on the router to a fixed setting.
    4. Set the Primary DNS on the computer to
      • Check the manual supplied with your modem or router to change the Primary DNS on a computer.
    5. Set the Primary DNS on the internet video device to

    Errors 5006, 5007, 5008, and 2200

    1. Check the physical connection by viewing the Network Status option in the menu.
    2. Make sure that the latest system software (firmware) update is installed. Updates can be obtained from the Network menu of the TV.
    3. Refresh the internet content.
    4. If the steps above didn't resolve the issue, perform a power reset or restart of the TV:
      • Turn off the TV, unplug the power cord for two minutes, then turn on the TV
      • Note: It may be necessary to reset the device two or three times.
    5. If the power reset does not resolve the issue, then perform a factory reset.