Article ID : 00012492 / Last Modified : 07/23/2019

How to enter a required security key to connect the TV to a secure wireless network.

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    IMPORTANT: If the TV being used is a Wi-Fi® ready TV, make sure that the UWA-BR100 USB Wireless adapter has been securely inserted into the USB port on the TV. For model-specific information regarding whether the TV being used has a built-in LAN or is wireless-ready, refer to the supplied operations manual.

    1. Using the supplied remote control, press the HOME button.
    2. Select Settings.
    3. Select Network Setup.
    4. Select Wireless Setup.
    5. Select Scan.


    6. Select your network from the list.


    7. Press the Enter button.


    8. Use the onscreen keypad to enter the security key. Press the abc button to change the character type.


    9. Press the Enter button.

    NOTE: Contact your Internet Service Provider (ISP) or the person that set-up your network if you do not remember your security key.