Article ID : 00012492 / Last Modified : 09/15/2020Print

How to enter a required security key to connect your TV to a secure wireless network

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    Note: If the TV being used is Wi-Fi® ready and using the UWA-BR100 USB wireless adapter, make sure it's been securely inserted into the USB port on the TV before following the steps below.

    For model-specific information regarding whether the TV being used has a built-in LAN or is wireless-ready, refer to the supplied operations manual.
    Manuals are posted on your model support page.

    1. Using the supplied remote control, press the HOME button.
    2. Select Settings.
    3. Select Network Setup.
    4. Select Wireless Setup.
    5. Select Scan.
    6. From the list of available networks, select your network.
    7. Press the Enter button to display the on-screen keyboard for entering your security key.
    8. Enter your security key (password) using the displayed on-screen keypad.
       To toggle the character type between numbers and letters, press the abc or 123 button in the lower-right of the onscreen keypad.
    9. Press the Enter button.

    Note: If you do not remember your security key, contact your internet service provider (ISP) or the person that set-up your network.