- The one-touch remote discussed in this solution is not a supplied accessory with all TVs that support the one-touch mirroring feature.  Go to Parts and Accessories.
- The one-touch mirroring feature is only supported on certain Sony® TVs and Sony Xperia smartphones.
- Set the NFC setting on the smartphone to On.
- Turn on the TV.
- Touch the NFC detection area of the smartphone to the N mark or the back of the one-touch remote for about 2 seconds.
- The device confirmation completion message will appear at the bottom of the TV screen. Separate the smartphone from the remote control.
- Make sure that the screen lock setting on the smartphone is released or off prior to touching the phone with the one-touch remote.
- Refer to the manual supplied with the smartphone, for information regarding the location or position of the NFC detection area on the phone and any settings information.
- If the TV does not detect the smartphone after touching the phone and the remote, separate the devices and try again.
Once these steps are completed you will see the content from the phone displayed or mirrored on the TV screen.