Article ID : 00239076 / Last Modified : 07/06/2023Print

Blu-ray Disc / DVD Player - Composite with 4 pole mini-plug RCA conversion cable

    Perform Connection

    Connection Diagram of Blu-ray Disc / DVD Player (RCA conversion)
    1. Composite Audio/Video cable
    2. 4 pole mini-plug RCA conversion cable (Sony Rca3p Conversion Cable 1-848-803-12)

    TV Set-up

    1. After securing the connection, turn on the TV and the BD/DVD player.
    2. On the supplied TV remote, press the (Input) button and set the input to the BD/DVD player.

    3. Start playback on the BD/DVD player.
      • If you connect a device that is compatible with “Control for Composite,” you can control it by simply using the TV’s remote.
      • If the device has a DVI jack (socket), connect it to the Composite (with AUDIO IN) port through a DVI - Composite adaptor interface (not supplied), and connect the device’s audio out jacks (sockets) to Composite 2 AUDIO IN or Composite 3 AUDIO IN. Port labels varies depending on your model/region/ country.


    These are basic troubleshooting steps based on the latest TV models. Refer to your product manual for model-specific information. Manuals are posted on your model support page. If the symptom still persists, contact Product Support.

    No picture appears on the TV screen when I connected the player using a composite cable.

    For some 2014 TV models (i.e. KDL-xxWxxxB Series), use the Problem Diagnosis feature to detect symptoms from the input devices.
    Press HOME button on the remote → HelpCustomer SupportProblem Diagnosis: External Device Symptom.

    Check the following:

    • Is the composite cable connected properly?
    • Is the correct input selected on TV?
    • If you mistakenly select a resolution that your TV doesn't support, you can reset it to factory default. In this case, press STOP button on the player for more than ten seconds to reset the video output resolution to the lowest resolution.