Sony SupportKDL-60EX701

Article ID : 00239000 / Last Modified : 07/06/2023Print

Home Theater - HDMI

     

    Before Connecting

    An A/V Receiver is a typical component of a Home Theater system. It's basic functionality is to receive and amplify an audio signal and allow it to pass through the video signal from other A/V devices to the TV.

     

    Making a Connection

    HDMI cable

    Connection Diagram of Home Theater (HDMI)
    1. Antenna cable
    2. HDMI cable with ARC (Audio Return Channel)

    If your Home Theater System, TV, and the HDMI® cable support ARC, the TV can transmit sound to the Home Theater System. When you connect the TV to the Antenna/Cable directly (without a Set Top Box), it allows you to hear the TV sound through the speakers of your Home Theater System.

    If you are using a Set Top Box, you'll need to output the sound from the Set Top Box to the Home Theater System.

    When connecting a BRAVIA™ Sync-compatible digital audio system with ARC technology, find the HDMI jack (socket) that carries the ARC mark (HDMI IN 1 or HDMI IN 2, depending on the model of your TV) and connect to it with an HDMI cable. However, if connecting a system that is not BRAVIA Sync-compatible or ARC capable, an additional audio connection via DIGITAL AUDIO OUT (OPTICAL) is necessary.

    If connecting a system that isn't compatible with Control for HDMI or ARC, an additional audio connection is necessary:

    HDMI + Optical Audio cable

    Connection Diagram of Home Theater (HDMI with Optical Audio cable)
    1. Antenna cable
    2. Audio cable (optional) - Optical Audio cable
    3. HDMI cable

    HDMI + Mini-plug audio to RCA cable

    Connection Diagram of Home Theater (HDMI with Mini-plug audio to RCA cable
    1. Antenna cable
    2. Audio cable (optional) - Mini-plug to RCA/Composite Audio cable
    3. HDMI cable

    This connection will transfer analogue audio, so the quality is lower than when you use Optical audio cable.

     

    TV Set-up

    1. After making a connection, turn on the TV and Home Theater System..
    2. Press the (Input) button repeatedly to select the input to the connected Home Theater System.

    3. For audio connection, press the HOME button on your remote, then select
      Settings → Sound → Speakers → Audio System.
    4. The connected audio system is turned on automatically. The volume can be controlled using the TV's remote.
      If you connect a BRAVIA Sync-compatible device, you can control it by simply using the TV's remote.
      For HDMI ARC and Optical audio connection, You need to configure the Digital Audio Out settings according to your audio system:
      • Select Settings → Sound → Digital Audio Out
      • Select Auto or PCM (Select Auto if the device connected via DIGITAL AUDIO OUT (OPTICAL) is compatible with Dolby Digital. Select PCM if the device isn't compatible with Dolby Digital).

    Troubleshooting

    These are basic troubleshooting steps based on the latest TV models. Refer to your product manual for model-specific information. Manuals are posted on your model support page.
    If the symptom still persists, please contact Product Support.

    No picture appears on the TV screen when connected to the home theatre system via HDMI.

    For some 2014 TV models (i.e. KDL-xxWxxxB Series), there is Problem Diagnosis feature that may detect connected device symptom: Press HOME button on the remote → Help → Customer Support → Problem Diagnosis: External Device Symptom.

    Please check the following:

    • Is the HDMI cable connected correctly?
    • Is the HDMI input selected on TV?
    • If a resolution setting unacceptable to your TV is mistakenly selected, you can reset it to the factory default. In this case, press STOP button on the player for more than 10 seconds to reset the video output resolution to the lowest resolution.
    No audio or low audio when connected to audio system
    • Ensure proper connection and both TV and Home Theater System are on.
    • Ensure proper input settings for both TV (see above TV Setup) and Home Theater System.
    • On Settings → Sound, make sure the settings are set as below:
      • Speakers: Audio System.
      • Headphone/Audio Out: Audio Out.
      • Audio Out: Fixed.
    • If there is still no audio, slightly increase the television volume.
    • If there is still no audio, slightly increase the volume level on the Home Theater System.
    • If you select an analog (RF) channel and pictures are displayed correctly, change the TV broadcast system. Press the HOME button, then select Settings → Analog Set-up → Manual Program Preset → TV System. (Availability of Manual Program Preset or option name differs depending on the region/country/situation.)