After plugging in the power cord, my TV doesn't turn on or takes a while to turn on

IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

After the power cord is plugged in, the TV needs a couple of minutes to initialize. The power buttons on the TV and the remote won't work during this short period, and the LED or illumination LED won't light up right away. This is a normal operation.

Follow the steps below if your TV can change the Operational Response or Illumination LED settings.

1. Go to the Settings screen on the TV
   • Using the Quick Settings button (For models released in 2019 or later)
     1. Press the (Quick Settings) button on the remote control.
     2. Select (Settings).
   • Using the HOME button
     1. Press the HOME button on the remote control.
     2. Select Settings.
2. The following steps depend on the menu options of your TV:
   • Select System → LED indicator → Operational Response.
   • Select Device Preferences → LED indicator → Operational Response.
   • Select Device Preferences → LED indicator → Illumination LED.
     
     Note: If the LED indicator is not shown, select Illumination LED.
   • Select LED Indicator → Illumination LED.
     
     Note: If the LED indicator is not shown, select Illumination LED.
   • Select Illumination LED.
3. Make sure the LED setting is not set to off.