Change the height and position of the table-top stand for my TV

You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.

1. Detach or remove the stand covers from the back of the TV.
   
2. With one or more people holding the TV, remove the screws and then the stand.
   
   Notes:
   • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
   • When reattaching the Table-Top Stand, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.
3. To reattach the Table-Top Stand safely, put a material of suitable hardness under the TV for support. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   BRAVIA 9 (XR90)	30~40	Approx. 15	More than 20

4. Reattach the Table-Top Stand.
   Note: For detailed instructions on attaching the Table-Top Stand, refer to the Setup Guide included with your TV or LCD monitor.

You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.

1. Detach or remove the stand covers from the back of the TV.
   
2. With one or more people holding the TV, remove the screws from behind the TV, and detach the Table-Top Stand.
   
   Note: As you detach the Table-Top Stand, be careful when lifting the TV because the Table-Top Stand may topple over and cause injury or damage to the TV and the surface that the TV is sitting on.
3. In order to reattach the Table-Top Stand safely, put a material of suitable hardness under the TV for support. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   BRAVIA 8 (XR80)	30~40	Approx. 10	More than 20

4. Reattach the Table-Top Stand.
   Note: For detailed instructions on how to attach the Table-Top Stand, refer to the Setup Guide included with your TV or LCD monitor.

Ways to change the height of the Table-Top Stand

You can change only the height of the Table-Top Stand.

Procedure

1. Detach or remove the stand covers from the back of the TV.
   
2. With one or more people holding the TV, remove the screws from behind the TV, and detach the Table-Top Stand.
   
   Note: As you detach the Table-Top Stand, be careful when lifting the TV because the Table-Top Stand may topple over and cause injury or damage to the TV and the surface that the TV is sitting on.
3. To reattach the Table-Top Stand safely, put a material of suitable hardness under the TV for support. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   BRAVIA 8Ⅱ (XR80M2)	30~40	Approx. 10	More than 20

4. Reattach the Table-Top Stand.
   Note: For detailed instructions on how to attach the Table-Top Stand, refer to the Setup Guide included with your TV or OLED monitor.

You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.

1. With one or more people holding the TV, remove the screws from behind the TV, and detach the Table-Top Stand.
   Notes:
   • Firmly hold the Table-Top Stand securely with both hands while the others lift the TV (or LCD/OLED monitor), and then carefully remove one side of the Table-Top Stand.
   
   
2. Repeat the process and remove the other side of the Table-Top Stand.
3. To reattach the Table-Top Stand safely, put a material of suitable hardness under the TV for support. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   BRAVIA 7 (XR70)	25~35	Approx. 25	More than 20

4. Reattach the Table-Top Stand.
   Note: For detailed instructions on how to attach the Table-Top Stand, refer to the Setup Guide included with your TV or LCD/OLED monitor.

Ways to change the height of the Table-Top Stand

You can change only the height of the Table-Top Stand.

Procedure

1. With one or more people holding the TV, remove the screws from behind the TV, and detach the Table-Top Stand.
   Notes:
   • Firmly hold the Table-Top Stand securely with both hands while the others lift the TV (or LCD monitor), and then carefully remove one side of the Table-Top Stand.
   • While detaching the Table-Top Stand from the TV, be careful not to use excessive force and lift the TV carefully. The TV set or Table-Top Stand may fall or topple over, resulting in personal injury or physical damage to the TV. It may also cause damage to the surface that the TV is sitting on.
   • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
2. Repeat the process and remove the other side of the Table-Top Stand.
3. To reattach the Table-Top Stand safely, put a material of suitable hardness under the TV for support. Make sure one or more persons continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   BRAVIA 5 (XR50)	30~35	Approx. 30	More than 20

4. Reattach the Table-Top Stand.
   Note: For detailed instructions on how to attach the Table-Top Stand, refer to the Setup Guide included with your TV or LCD monitor.

A95K series: You can change the mounting direction of the TV tabletop stand to the front or the back.

A90K series: You can change the height of the stand.

1. With one or more people holding the TV, remove the screws and then the stand.
   
   A95K series
   
   A90K series
   
2. Reattach the tabletop stand to the desired position.
   Note: For detailed instructions on attaching the tabletop stand, refer to the Setup Guide included with your TV.

Ways to change the height or position of the Table-Top Stand

• A95L series (55, 65 inches): You can change the height of the Table-Top Stand
  
• A95L (77 inches), X95L, X93L, Z9K, X95K series: You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.
  

1. With one or more people holding the TV, remove the screws and then the stand.
   
   Notes:

   • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
   • When reattaching the Table-Top Stand, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.
   • The image below is an example. The shape of the Table-Top Stand and the details of the screw attachment may differ slightly depending on the model.
     
   
   
2. Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   A95L, X95L, X93L, Z9K, X95K series	30~40	Approx. 10	More than 20

3. Reattach the tabletop stand to the desired position.
   
   Note: For detailed instructions on attaching the Table-Top Stand, refer to the Setup Guide included with your TV.

Ways to change the height or position of the Table-Top Stand

• You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.
  

1. With the TV being held by three or more people, remove the screws from behind the TV, and detach the Table-Top Stand.
   Notes:
   • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
   • When reattaching the Table-Top Stand, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.
   • 
2. To reattach the Table-Top Stand safely, support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   A80L series (83 inches)	30~40	Approx. 25	More than 20

3. Reattach the tabletop stand to the desired position.
   Note: For detailed instructions on attaching the Table-Top Stand, refer to the Setup Guide included with your TV.

Ways to change the height or position of the Table-Top Stand A80L Series (55, 65 inches)

You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or slightly inside the position of the TV.

• A80L Series (77 inches): You can change the height and position of the Table-Top Stand. The position of the Table-Top Stand can be changed to the outside or inside the position of the TV.
  

1. With one or more people holding the TV, remove the Table-Top Stand from the TV.
   Notes:
   • While detaching the Table-Top Stand from the TV or OLED monitor, be careful not to use excessive force and lift the TV carefully. The TV or OLED monitor set or Table-Top Stand may fall or topple over, resulting in personal injury or physical damage to the TV or OLED monitor. It may also cause damage to the surface on which the TV is sitting.
   • Firmly hold the Table-Top Stand securely with both hands while the others lift the TV or OLED monitor, and then carefully remove one side of the Table-Top Stand.
     
2. Repeat the process and remove the other side of the Table-Top Stand.
3. To reattach the Table-Top Stand safely, support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
   
   (Unit=cm)

   TV model series name	A	B	C
   A80L Series (55, 65, 77 inches)	30~40	Approx. 25	More than 20

4. Reattach the Table-Top Stand.
   Note: For detailed instructions on attaching the Table-Top Stand, refer to the Setup Guide included with your TV.

You can change the height and position of the TV tabletop stands. The stands can be changed to the outside, inside, or raised positions on the A80K series or the outside or raised positions on the X90K series TVs.

• A80K
  
  • A: 55" and 65": Outside, inside, and raised position
  • B: 77": Outside, inside, and raised position
• X90K series (55-85)
  

1. With the TV being held by three or more persons, remove one leg at a time from the TV.
   
   
2. Repeat the process and remove the other stand.
3. Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
4. Reattach the stands.
   Notes:
   • For detailed instructions on attaching the tabletop stands, refer to the Setup Guide included with your TV.
   • For the A80K series: The height of the tabletop stands can be adjusted by changing the mounting position of the stand assembly.
     
     • A: Low position: align the stand assembly to the stand neck with indication L. Screw the stand assembly to the stand neck using screw PSW M5L14 X2.
     • B: High position: align the stand assembly to the stand neck with indication U. Screw the stand assembly to the stand neck using screw PSW M5L14 X2.

1. With one or more people holding the TV, remove the tabletop stand one leg at a time.
   
2. Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
3. Reattach the stands in the desired position.
   Note: For detailed instructions on attaching the tabletop stands, refer to the Setup Guide.

1. With one or more people holding the TV, remove the screws and then remove one leg at a time.
   
2. Support the bottom of your TV with a material of suitable hardness. Make sure one or more people continuously hold the TV.
3. Reattach the tabletop stand to the desired position. Make sure to fasten the screws to the original holes on the rear of the TV.
   Note: For detailed instructions on attaching the tabletop stand, refer to the Setup Guide.

1. Pull out the Stand from the TV
   
2. Attach the stands using the guides below.

   • For A8H series

     
     
     

   • For X950H series (55, 65, 75)

     
     
     

1. Detach the tabletop stand from the TV.
   
2. Attach the stand referring to the guide below.
   
   Note: This guide is for reference. For more information, refer to the Setup Guide included with your TV.