Sony SupportVPL-VW295ES

Specifications

Product Highlights

    • Size & Weight

        • Weight

          Approx. 31 lb (14 kg)

        • Dimensions (W x H x D)

          49.5 x 20.5 x 46.3 cm

    • Display

        • Display System

          4K SXRD™ panel, projection system

        • Display Resolution

          Computer signal input: Maximum display resolution: 1,920 x 1,080 dots (HDMI input only)/video signal input: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60 i, 1080/50 i, 1 080/60p, 1080/50p, 1080/24p, 3840 x 216 0/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 216 0/30p, 4096 x 2160/50p, 4096 x 2160/60p

        • Light source

          High-pressure mercury lamp, 225 W type

    • General Features

        • Projection lens shift

          Vertical: +85% -80% Horizontal: +/-31%

        • Screen size

          1,524 mm to 7,620 mm (60 in to 300 in)

        • Effective pixels

          26,542,080 (4096 x 2160 x 3) pixels

        • Effective display size

          18.80 mm x 3

    • Hardware

        • Projection lens zoom / focus

          Powered (Approx. x2.06)

    • Interface

        • Input and Output Terminals

          HDMI (2 INPUTS) 1 - Digital RGB/Y Pb/Cb Pr/Cr, IR IN - Minijack, LAN - RJ45, 10Base-T/100BASE-TX, REMOTE - RS-232C, D-sub 9-pin (male), TRIGGER - Minijack, DC 12 V Max. 100 mA, USB - DC 5 V, Max. 500 mA

    • Operating Conditions

        • Operating temperature / humidity

          41 °F to 95 °F (5 °C to 35 °C)/35% to 85% (no condensation)

        • Storage temperature / humidity

          -4 °F to +140 °F (-20 °C to +60 °C)/10% to 90% (no condensation)

    • Power

        • Power consumption

          390 W

        • Acoustic noise

          26 dB

        • Power requirement

          AC 100 V to 240 V, 4.0 A to 1.7 A, 50/60 Hz

    • Video Features

        • Color Light Output

          1,500 lm (Lamp mode: High) 2

        • Light Output

          1,500 lm (Lamp mode: High) 2

    • Eco and energy saving

        • Power Consumption (Networked Standby Mode) – Terminals

          1.0 W (LAN) (when “Remote Start” is set to “On”) When a LAN terminal is not connected, it goes into low power consumption mode (0.5 W).

        • Power Consumption (Standby Mode)

          0.4 W (when “Remote Start” is set to “Off”)

        • Standby Mode Activated

          After about 10 Minutes

    • What's In The Box

      • Remote Control (RM-PJ28)
      • Size AA (R6) manganese batteries (2)
      • AC Power Cord (1), Lens Cap (1)
      • Operating Instructions (CD-ROM)
      • Quick Reference Manual