Article ID : 00029578 / Last Modified : 05/13/2024Print

There is no audio or poor audio after pairing the headphones to a computer

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    To stream high-quality music, the headphones must be paired to a Bluetooth® enabled device that supports the A2DP profile.

    Sound quality when listening to music from a computer through your headphones may be poor for the first few seconds after the Bluetooth® connection is established. For example, it may be difficult to hear the vocals of the music. This is due to the computer specifications and is not a malfunction of your headphones. The computer transmits music with priority on connection stability. After a few seconds, it changes the priority to sound quality.

    If the sound quality doesn't improve after a few seconds, additional troubleshooting is available below.

    Before you start

    Configure the computer to connect using A2DP

    1. Press the Play button one time during playback.
    2. Configure your computer to connect using an A2DP profile.
      • For instructions on how to operate the computer, refer to the computer manual or contact the manufacturer.
      • Depending on the capabilities of your computer, you may need to perform these additional steps:
      1. On your computer, click on the Bluetooth icon.
      2. Scroll down to the connected headphones.
      3. Highlight the connected headphones, and two choices will appear:
        • Headset
        • Headphones
      4. Click on Headphones.
        • This should increase the sound quality through your headphones.

    Related info

    A separate article is available if you're unable to pair your headphones with a Bluetooth device.