Article ID : 00228645 / Last Modified : 07/17/2020

Check the status of the Bluetooth indicator on your speaker

    Follow these instructions and then check the status of the Bluetooth® indicator:

    1. Delete the Bluetooth device information of your playback device.

      Note: If the speaker isn’t listed in the Bluetooth device information on the playback device, proceed to the next step.

    2. Initialize the speaker.

      Notes:

      • WARNING!Performing this step will reset all settings in the speaker and deletes all pairing and device information.

      • If model-specific information is required to complete this step, check your manual.
      • The image used is for the SRS-XB22 wireless speaker.

      1. Turn on the speaker.
      2. Press and hold the - (volume) and (power)/ PAIRING buttons simultaneously for more than five seconds.

        • The speaker will turn off when the initialization is complete.
    3. Turn on the speaker.

    What's the status of the Bluetooth indicator?

    Bluetooth indicator flashing on speaker

    • The Bluetooth indicator flashes slowly or lights up.
      • Initialization isn't possible and the power is on. Initialize the speaker again.
    • The Bluetooth indicator flashes quickly (three times a second).

     

    Return to Main Menu