IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.
Follow these steps to switch the live view display back to the LCD if the viewfinder stops working when Viewfinder is set as the view screen under FINDER/MONITOR:
- Use a micro HDMI® cable to connect your camera to a monitor or TV. The display will automatically come up on the monitor or TV.
- Disconnect the micro HDMI cable. The display should automatically switch back to the LCD screen. If it doesn't, try the following:
- Press the Menu button.
- Select Custom Settings.
- Scroll to select FINDER/MONITOR.
- Select Monitor.